Black Friday 2024

2 Inch Tri-Clover Bulkhead - Weldless Bulkhead

This part is custom made for KegLand and is a part you can use to drill a 45-47mm hole into the wall of a tank or lid of a fermenter...

49⁹⁹

Anvil High Precision Digital Scale

Anvil Brewing Equipment high precision digital scale has a 4”X 4” stainless steel weighing surface and a capacity of 4.4lb (2 KG) and a precision of 0.005 oz. (0.1g)! Perfect...

39⁹⁹

Anvil Large Grain Scale

Anvil Brewing Equipment high capacity digital grain scale handles up to 65lb with 0.02lb accuracy! The huge 12.5” X 11.75” stainless steel weighing surface is big enough to support about any size...

109⁹⁹

Blichmann RipTide Brewing Pump - Noble Grape

Blichmann RipTide Pump - NPT

Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult...

349⁹⁹

Blichmann RipTide Pump - Tri-Clamp

Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult...

349⁹⁹

BrewZilla 2 Inch Tri-Clover Steam Condenser Set

This steam condenser is compatible with the 35L BrewZilla using a stainless distillation lid and 2 Inch Bulkhead. This unit can allow brewing indoors without that pesky sticky steam gumming up...

219⁹⁹

Camlock Disconnect - Female (1/2" Barb)

304 Stainless steel Camlock disconnect.

9⁹⁹

Grainfather - SF70 Casters

Casters for SF70 legs.

12⁹⁹

Heating Pad, Mangrove Jack's

Mangrove Jack's Heating Pad gives an evenly distributed, gentle warming of your entire fermenting wine and beer. No hot spots. Effective in rooms as cool as 55° F (13° C) Perfect...

49⁹⁹

Keg-To-Keg Filter

Give your beer a finished sparkle with the Keg-To-Keg filter. For use with ball lock kegs. Kit includes: 2 x Ball lock "Out" Connectors 2 x Pipe Clamps Pad Housing...

69⁹⁹

KegLand Series X - Kegerator (With Double Stainless Tower & 2 NUKATAP)

KEGERATORS SHIP WITH $100 FLAT RATE SHIPPING TO ALL CANADIAN PROVINCES! PLEASE NOTE: KEGERATORS ONLY SHIP VIA UPS, AND CANNOT SHIP TO A PO BOX. Available at our Burnside location or...

987⁹⁶

KegLand Series X - Kegerator (With Single Stainless Tower & 1 NUKATAP)

KEGERATORS SHIP WITH $100 FLAT RATE SHIPPING TO ALL CANADIAN PROVINCES! PLEASE NOTE: KEGERATORS ONLY SHIP VIA UPS, AND CANNOT SHIP TO A PO BOX. This is one configuration you can...

936⁹⁷

Quick Disconnect - Female (1/2" FPT)

304 Stainless Steel quick connect pressure tested at 60 PSI

12⁹⁹

Series X Plus Kegerator (With 2 x Single Stainless Tower & 2 x NUKATAP)

The worlds most compact turnkey solution for an 8 x Keg kegerator. This model is great value, fits 8 x corny kegs or 2 x 50L kegs. Suitable for two...

1,373⁹³

Series X Plus Kegerator with (With 2 x Double Stainless Tower & 4 x NUKATAP)

The worlds most compact turnkey solution for an 8 x Keg kegerator. This model is great value, fits 8 x corny kegs or 2 x 50L kegs. Suitable for two...

1,475⁹³

Ss Brewtech 8 Inch Gasket

8" TC gasket for cooling coil lid on 20 gal, 1BBL Brite Tanks, and 1BBL Unitanks.

13⁹⁹

Ss Brewtech Brew Bucket Heating & Chilling Upgrade Kit 7 gal

Only compatible with 7 Gallon Brew Buckets. The FTSs² uses a precision temperature controller that constantly monitors the temperature of your fermentation to within 1° of its set point. When...

399⁹⁹

Ss Brewtech Brew Bucket O Rings

Replacement O-rings for the Brew Bucket ball valve & racking arm. 4 pcs 8.5mm x 1mm 2 pcs 16mm x 1.8mm

2⁶⁹

Ss Brewtech Chronical O Rings

Replacement O rings for Chronical and Unitank racking arm. 4 pcs - 10mm x 1.2mm

4⁹⁹

Ss Brewtech Chronical/Unitank Heating Upgrade Kit

This upgrade kit is for existing owners of our FTSs system that want a two stage switchable controller and a custom heater pad for their fermenter. Kit includes: 1x heater...

199⁹⁹

Shop By

Black Friday 2024

Recently Viewed Products